Mutations in VKORC1 cause warfarin resistance and multiple coagulation factor deficiency type 2
Coumarin derivatives such as warfarin represent the therapy of choice for the long-term treatment and prevention of thromboembolic events. Coumarins target blood coagulation by inhibiting the vitamin K epoxide reductase multiprotein complex (VKOR). This complex recycles vitamin K 2,3-epoxide to vitamin K hydroquinone, a cofactor that is essential for the post-translational -carboxylation of several blood coagulation factors. Despite extensive efforts, the components of the VKOR complex have not been identified. The complex has been proposed to be involved in two heritable human diseases: combined deficiency of vitamin-K-dependent clotting factors type 2 (VKCFD2; Online Mendelian Inheritance in Man (OMIM) 607473), and resistance to coumarin-type anticoagulant drugs (warfarin resistance, WR; OMIM 122700). Here we identify, by using linkage information from three species, the gene vitamin K epoxide reductase complex subunit 1 (VKORC1), which encodes a small transmembrane protein of the endoplasmic reticulum. VKORC1 contains missense mutations in both human disorders and in a warfarin-resistant rat strain. Overexpression of wild-type VKORC1, but not VKORC1 carrying the VKCFD2 mutation, leads to a marked increase in VKOR activity, which is sensitive to warfarin inhibition.
Transgenic mice: Fat-1 mice convert n-6 to n-3 fatty acids
Mammals cannot naturally produce omega-3 (n-3) fatty acids — beneficial nutrients found mainly in fish oil — from the more abundant omega-6 (n-6) fatty acids and so they must rely on a dietary supply. Here we show that mice engineered to carry a fat-1 gene from the roundworm Caenorhabditis elegans can add a double bond into an unsaturated fatty-acid hydrocarbon chain and convert n-6 to n-3 fatty acids. This results in an abundance of n-3 and a reduction in n-6 fatty acids in the organs and tissues of these mice, in the absence of dietary n-3. As well as presenting an opportunity to investigate the roles played by n-3 fatty acids in the body, our discovery indicates that this technology might be adapted to enrich n-3 fatty acids in animal products such as meat, milk and eggs.
Mixing, volatile loss and compositional change during impact-driven accretion of the Earth
The degree to which efficient mixing of new material or losses of earlier accreted material to space characterize the growth of Earth-like planets is poorly constrained and probably changed with time. These processes can be studied by parallel modelling of data from different radiogenic isotope systems. The tungsten isotope composition of the silicate Earth yields a model timescale for accretion that is faster than current estimates based on terrestrial lead and xenon isotope data and strontium, tungsten and lead data for lunar samples. A probable explanation for this is that impacting core material did not always mix efficiently with the silicate portions of the Earth before being added to the Earth's core. Furthermore, tungsten and strontium isotope compositions of lunar samples provide evidence that the Moon-forming impacting protoplanet Theia was probably more like Mars, with a volatile-rich, oxidized mantle. Impact-driven erosion was probably a significant contributor to the variations in moderately volatile element abundance and oxidation found among the terrestrial planets.
The conserved kinetochore protein shugoshin protects centromeric cohesion during meiosis
Meiosis comprises a pair of specialized nuclear divisions that produce haploid germ cells. To accomplish this, sister chromatids must segregate together during the first meiotic division (meiosis I), which requires that sister chromatid cohesion persists at centromeres. The factors that protect centromeric cohesion during meiosis I have remained elusive. Here we identify Sgo1 (shugoshin), a protector of the centromeric cohesin Rec8 in fission yeast. We also identify a homologue of Sgo1 in budding yeast. We provide evidence that shugoshin is widely conserved among eukaryotes. Moreover, we identify Sgo2, a paralogue of shugoshin in fission yeast, which is required for faithful mitotic chromosome segregation. Localization of Sgo1 and Sgo2 at centromeres requires the kinase Bub1, identifying shugoshin as a crucial target for the kinetochore function of Bub1. These findings provide insights into the evolution of meiosis and kinetochore regulation during mitosis and meiosis.
The formation of Kuiper-belt binaries through exchange reactions
Recent observations have revealed that an unexpectedly high fraction—a few per cent—of the trans-Neptunian objects (TNOs) that inhabit the Kuiper belt are binaries. The components have roughly equal masses, with very eccentric orbits that are wider than a hundred times the radius of the primary. Standard theories of binary asteroid formation tend to produce close binaries with circular orbits, so two models have been proposed to explain the unique characteristics of the TNOs. Both models, however, require extreme assumptions regarding the size distribution of the TNOs. Here we report a mechanism that is capable of producing binary TNOs with the observed properties during the early stages of their formation and growth. The only required assumption is that the TNOs were initially formed through gravitational instabilities in the protoplanetary dust disk. The basis of the mechanism is an exchange reaction in which a binary whose primary component is much more massive than the secondary interacts with a third body, whose mass is comparable to that of the primary. The low-mass secondary component is ejected and replaced by the third body in a wide but eccentric orbit.
设计具有大表面积的分子的方法 去年6月Nature杂志(Vol. 423, p. 705)上的一篇Review文章介绍了一种被称为网状合成的设计方法,该方法已被用来合成具有迄今为止最高表面积(每克4500平方米)的多孔晶体。该领域的长时间“纪录”为每克2000平方米,是多孔碳所保持的,而金属有机材料曾将该纪录刷新到每克3000平方米。新合成的这种被称为MOF-177的材料既具有极高的表面积,又具有一个有序的结构,该结构含有大尺度的孔,能结合多环客体分子:大小从二氮到C60和大型多环有机物的分子都能结合,这在涉及大分子的催化和分离等领域是一个有用的性能。研究人员还提出了一种设计表面积更大的分子的方法,这种分子所具有的性能更接近未来运输技术所需的实用气体储存方法所要求的关键性能。
A route to high surface area, porosity and inclusion of large molecules in crystals
One of the outstanding challenges in the field of porous materials is the design and synthesis of chemical structures with exceptionally high surface areas. Such materials are of critical importance to many applications involving catalysis, separation and gas storage. The claim for the highest surface area of a disordered structure is for carbon, at 2,030 m2 g-1 (ref. 2). Until recently, the largest surface area of an ordered structure was that of zeolite Y, recorded at 904 m2 g-1 (ref. 3). But with the introduction of metal-organic framework materials, this has been exceeded, with values up to 3,000 m2 g-1 (refs 4–7). Despite this, no method of determining the upper limit in surface area for a material has yet been found. Here we present a general strategy that has allowed us to realize a structure having by far the highest surface area reported to date. We report the design, synthesis and properties of crystalline Zn4O(1,3,5-benzenetribenzoate)2, a new metal-organic framework with a surface area estimated at 4,500 m2 g-1. This framework, which we name MOF-177, combines this exceptional level of surface area with an ordered structure that has extra-large pores capable of binding polycyclic organic guest molecules—attributes not previously combined in one material.
Hydrogenation and cleavage of dinitrogen to ammonia with a zirconium complex
Molecular nitrogen is relatively inert owing to the strength of its triple bond, nonpolarity and high ionization potential. As a result, the fixation of atmospheric nitrogen to ammonia under mild conditions has remained a challenge to chemists for more than a century. Although the Haber–Bosch process produces over 100 million tons of ammonia annually for the chemical industry and agriculture, it requires high temperature and pressure, in addition to a catalyst, to induce the combination of hydrogen (H2) and nitrogen (N2). Coordination of molecular nitrogen to transition metal complexes can activate and even rupture the strong N–N bond under mild conditions, with protonation yielding ammonia in stoichiometric and even catalytic yields. But the assembly of N–H bonds directly from H2 and N2 remains challenging: adding H2 to a metal–N2 complex results in the formation of N2 and metal–hydrogen bonds or, in the case of one zirconium complex, in formation of one N–H bond and a bridging hydride. Here we extend our work on zirconium complexes containing cyclopentadienyl ligands and show that adjustment of the ligands allows direct observation of N–H bond formation from N2 and H2. Subsequent warming of the complex cleaves the N–N bond at 45 °C, and continued hydrogenation at 85 °C results in complete fixation to ammonia.
Mangroves enhance the biomass of coral reef fish communities in the Caribbean
Mangrove forests are one of the world's most threatened tropical ecosystems with global loss exceeding 35% (ref. 1). Juvenile coral reef fish often inhabit mangroves, but the importance of these nurseries to reef fish population dynamics has not been quantified. Indeed, mangroves might be expected to have negligible influence on reef fish communities: juvenile fish can inhabit alternative habitats and fish populations may be regulated by other limiting factors such as larval supply or fishing. Here we show that mangroves are unexpectedly important, serving as an intermediate nursery habitat that may increase the survivorship of young fish. Mangroves in the Caribbean strongly influence the community structure of fish on neighbouring coral reefs. In addition, the biomass of several commercially important species is more than doubled when adult habitat is connected to mangroves. The largest herbivorous fish in the Atlantic, Scarus guacamaia, has a functional dependency on mangroves and has suffered local extinction after mangrove removal. Current rates of mangrove deforestation are likely to have severe deleterious consequences for the ecosystem function, fisheries productivity and resilience of reefs. Conservation efforts should protect connected corridors of mangroves, seagrass beds and coral reefs.
Crystal structure and mechanism of a bacterial fluorinating enzyme
Fluorine is the thirteenth most abundant element in the earth's crust, but fluoride concentrations in surface water are low and fluorinated metabolites are extremely rare. The fluoride ion is a potent nucleophile in its desolvated state, but is tightly hydrated in water and effectively inert. Low availability and a lack of chemical reactivity have largely excluded fluoride from biochemistry: in particular, fluorine's high redox potential precludes the haloperoxidase-type mechanism used in the metabolic incorporation of chloride and bromide ions. But fluorinated chemicals are growing in industrial importance, with applications in pharmaceuticals, agrochemicals and materials products. Reactive fluorination reagents requiring specialist process technologies are needed in industry and, although biological catalysts for these processes are highly sought after, only one enzyme that can convert fluoride to organic fluorine has been described. Streptomyces cattleya can form carbon–fluorine bonds and must therefore have evolved an enzyme able to overcome the chemical challenges of using aqueous fluoride. Here we report the sequence and three-dimensional structure of the first native fluorination enzyme, 5'-fluoro-5'-deoxyadenosine synthase, from this organism. Both substrate and products have been observed bound to the enzyme, enabling us to propose a nucleophilic substitution mechanism for this biological fluorination reaction.